How To Hook Up A Generac Generator To Your House. Let the generator run for at least 5 minutes so it’s warmed up and ready to power your building. Place the generator in an outdoor environment.
This means that you could mistakenly connect your generator to the grid lines. Each of these has their pros and cons, but all essentially work the same. Hook up the gen cord and the transfer switch.
60 Inches (5 Feet) From Doors, Windows, And Fresh Air Intakes.
The hole will serve as an entrance of the cables from the genset to your house. Connect the generator input on the transfer switch to the generator. You can watch this video by.
When The Grid Power Is Cut Off You Can Manually Shift The Main Circuit Breaker Of The Transfer Switch To Generator Power.
See the simplest way to legally connect your generator to your house. Run one gen cord from the generator and connect multiple appliances. And line workers may get electrocuted when your generator is on.
Depending On Your Circumstances, It Makes Sense To Buy A 240 Volt Extension Cord With The Correct Amperage For Your Generator.
To test this plug type connection, turn on your generator power, hook the inlet plug, and connect the extension into the generator inlet plug. They’re simple, and quite frankly, they work. The hole should be big enough to accommodate all the wires.
Buy The Wires, Plug, And Make Sure You Have The Right Tools.
Install wires and generator breaker. Take measures to protect it with specifically designed tents. Take the unit outside that is a minimum of 10 feet away from openings.
Connect Generator To Indoor Appliances By One Of The Following Ways:
This means that you could mistakenly connect your generator to the grid lines. Now grab a driller and get some drilling job done. Since whole house generators run on natural gas or propane, they require no maintenance from homeowners in the event of an emergency.